How Much to Charge to Install a Tankless Water Heater

A switch from a tank to tankless is a new install, not a swap. Price the hours, the gas line, the vent and the power, and give a new tank as the other choice.

Price the switch, not the box

Going from a tank to tankless is a new install, so price it as one. Take your hours times your rate. Then add the unit, the gas line, the vent, the power, the old tank out and the permit.

A tankless unit heats water only as it flows. It hangs on the wall and has no tank to fill.

The unit is just one line. Most of the cost is in what the house needs to feed it.

Plan on a full day, not 2 or 3 hours

A tank swap takes 2 to 3 hours. A switch to tankless often takes 6 to 10. Time your own jobs for a few weeks. Your real hours beat any chart you find online.

The extra time goes to work a tank swap never needs:

  • Taking out the old tank and draining it.
  • Hanging the new unit on the wall.
  • Moving the water lines to meet it.
  • Running a bigger gas line.
  • Cutting in a new vent.
  • Adding a plug or a circuit for power.
  • Putting in valves so the unit can be flushed later.

Walk the job before you quote. Look at the gas meter, the gas line, the path out for the vent and the panel.

Check the gas line and the vent before you quote

A gas tankless unit burns far more gas than a tank, so the old line is often too small. A tank might use 40,000 BTU an hour. BTU is a way to count how much gas it burns. Many tankless units use up to 199,000.

Size the gas line from the gas code tables or the maker's chart. Count the length of the run and every other gas item in the house. A thin line that fed a tank can starve a tankless unit.

  • Gas line: often a new 3/4 inch line from the meter, priced by the foot.
  • Meter: a big load can mean the gas company has to change the meter. Ask early.
  • Vent: the old tank vent can't be used. Most units need their own vent, set by the maker's manual.
  • Drain: a high-efficiency unit makes water as it runs. It needs a drain, and often a small part to treat that water.
  • Power: a gas unit still needs a plug nearby for its fan and controls.

An electric unit can mean a new panel

A whole-house electric unit needs huge power, often 100 to 150 amps. That is 2 to 4 big circuits of its own. Many homes don't have that much room in the panel.

Check the panel and the size of the service before you quote. If it can't carry the load, that is a panel upgrade. Quote it as its own job, or bring in an electrician.

Small electric units under one sink need much less power. They are a different job from heating the whole house.

A worked example: gas tankless in a garage

Here is one way the numbers can add up. Every figure is an example. Swap in your own rate and your supplier's prices.

Say your rate is $150 an hour. It has to cover your pay, the truck, gas, insurance, tools and the office. The job takes out a 50 gallon gas tank in a garage and puts a gas tankless unit on the same wall.

  • Labor: 8 hours at $150, $1,200.
  • Unit: your price to the customer, $1,800.
  • Gas line: 20 feet of new 3/4 inch line with parts, $250.
  • Vent and drain: the vent kit, pipe and a drain line, $250.
  • Valves and parts: a flush valve kit and fittings, $150.
  • Power: a new plug by the unit, $150.
  • Old tank out: haul it away, $75.
  • Permit: passed through at cost, $150.

That comes to about $4,025 for the switch. A tank swap in the same garage might be $1,900 to $2,400. Show the customer both.

Show both choices on the quote as a few clear lines

Give 2 real choices, each a full job with its own total. One is the switch to tankless. The other is a new tank in the same spot. The customer picks what fits the home and the budget.

For the tankless choice, keep it to a few lines:

  • Equipment: the unit, with the maker's warranty.
  • Install: the labor, the valves and the water lines.
  • Gas and vent: the new gas line, the vent and the drain.
  • Power: the plug, or the circuits for an electric unit.
  • Permit and old tank: the permit, and the tank hauled away.

Then say what is not included. For example: a panel upgrade, a new gas meter, patching walls or a water softener. Each one can be its own quote.

The federal tax credit for these units ended for units put in after 2025. Some gas and power companies still pay rebates. Check yours before you mention one.

Keep the unit, each part and your gas line price per foot in your price book. Then the next switch takes a few minutes to quote.

Fair questions

How long does a switch to tankless take?
Plan on most of a day. A simple gas switch might take 6 hours. A long gas run, a hard vent path or new power can take 10 or more.
Should I sell a yearly flush with it?
Yes, in most places. Hard water leaves scale, a crust of minerals, inside the unit. A yearly flush keeps it running well, and the maker may ask for it to keep the warranty good.
Do I need a permit to put in a tankless unit?
In most places, yes. Many towns want a plumbing permit, and some want a gas or electrical permit too. Call your local office to be sure.

The quote, drafted from your own price book.

TruckDesk answers the call, drafts the quote from your own price book, and carries the job through to the invoice.